onsemi FOD073L

Optocoupler DC-IN 2-CH Darlington With Base DC-OUT 8-Pin SOIC N Rail

Dual-Channel Low Input Current High Gain Split Darlington Optocoupler

OPTOCOUPLER, 2500VRMS, 2-CHANNEL, SOIC-8;

OPTOCOUPLER DARL 2.5KVRMS 8SOIC

OptoCouplers & OptoIsolators DCLC High Gain Split Darlington

1kV/us DC SOP-8 Optocouplers - Logic Output ROHS

OPTOISOLTR 2.5KV 2CH DARL 8-SOIC

So8 3.3V 100K Tr Rohs Compliant: Yes

The FOD073L optocoupler consists of an AlGaAs LED optically coupled to a high gain split darlington photodetector. This device is specified to operate at a 3.3V supply voltage.The split darlington configuration separating the input photodiode and the first stage gain from the output transistor permits lower output saturation voltage and higher speed operation than possible with conventional darlington phototransistor optocouplers. An integrated emitter - base resistor provides superior stability over temperature.The combination of a very low input current of 0.5 mA and a high current transfer ratio of 2000% makes this device particularly useful for input interface to MOS, CMOS, LSTTL and EIA RS232C, while output compatibility is ensured to LVCMOS as well as high fan-out LVTTL requirements.An internal noise shield provides exceptional common mode rejection of 10 kV/µs.