onsemi FAN53555UC08X

Switching Regulator, Voltage-mode, 5A, 2750kHz Switching Freq-Max, PBGA20

5 A, 2.4 MHz, Digitally Programmable TinyBuck™ Regulator

Conv DC-DC 2.5V to 5.5V Synchronous Step Down Single-Out 0.6V to 1.23V 5A 20-Pin WLCSP T/R

FAN53555 Tape & Reel (TR) Tin/Silver/Copper (Sn/Ag/Cu) LIFETIME (Last Updated: 1week ago) DC to DC switching regulator 5V 1.6mm 4A 2.4MHz

The FAN53555 is a step-down switching voltage regulator that delivers a digitally programmable output from an input voltage supply of 2.5 V to 5.5 V. The output voltage is programmed through an I2C interface capable of operating up to 3.4 MHz.Using a proprietary architecture with synchronous rectification, the FAN53555 is capable of delivering 5 A continuous at over 80% efficiency, while maintaining over 80% efficiency at load currents as low as 10 mA. Pulse currents as high as 6.5 A can be supported by the 05 option. The regulator operates at a nominal fixed frequency of 2.4 MHz, which reduces the value of the external components to 330 nH for the output induction and as low as 20 µF for the output capacitor. Additional output capacitance can be added to improve regulation during load transients without affecting stability. Inductance up to 1.2 µH may be used with additional output capacitance.At moderate and light loads, Pulse Frequency Modulation (PFM) is used to operate in Power-Save Mode with a typical quiescent current of 60 µA. Even with such a low quiescent current, the part exhibits excellent transient response during large load swings. At higher loads, the system automatically switches to fixed-frequency control, operating at 2.4 MHz. In Shutdown Mode, the supply current drops below 1 µA, reducing power consumption. PFM Mode can be disabled if constant frequency is desired. The FAN53555 is available in a 20-bump, 1.6 x 2 mm, WLCSP.