onsemi FAN53540UCX

Switching Regulator, Voltage-Mode, 5A, 3000kHz Switching Freq-Max, PBGA20

2.4 MHz, 5 A TinyBuck Synchronous Buck Regulator

Conv DC-DC 2.7V to 5.5V Synchronous Step Down Single-Out 0.8V to 4.95V 5A 20-Pin WLCSP T/R

FAN53540 Cut Tape (CT) TIN SILVER COPPER ACTIVE NOT REC (Last Updated: 1week ago) DC to DC switching regulator 5V 1.56mm 5A 2.4MHz

The FAN53540 is a step-down switching voltage regulator that delivers an adjustable output from an input voltage supply of 2.7 V to 5.5 V. Using a proprietary architecture with synchronous rectification, the FAN53540 is capable of delivering 5A at over 90% efficiency, while maintaining a very high efficiency of over 80% at load currents as low as 2 mA. The regulator operates at a nominal fixed frequency of 2.4MHz, which reduces the value of the external components to 470 nH for the output inductor and 20 µF for the output capacitor. Additional output capacitance can be added to improve regulation during load transients without affecting stability and inductance up to 1.2 µH may be used with additional output capacitance. At moderate and light loads, pulse frequency modulation (PFM) is used to operate the device in power-save mode with a typical quiescent current of 50 µA. Even with such a low quiescent current, the part exhibits excellent transient response during large load swings. At higher loads, the system automatically switches to fixed-frequency control, operating at 2.4 MHz. In shutdown mode, the supply current drops below 1 µA, reducing power consumption. PFM mode can be disabled if constant frequency is desired. The FAN53540 is available in a 20-bump 1.96 mm x 1.56 mm Wafer-Level Chip-Scale Package (WLCSP).