onsemi FAN23SV60MPX

Switching Regulator, Voltage-Mode, 10A, 1500kHz Switching Freq-Max

Conv DC-DC 7V to 24V Synchronous Step Down Single-Out 0.6V to 5.5V 15A 34-Pin PQFN EP T/R

FAN23SV60 Cut Tape (CT) Tin (Sn) ACTIVE NOT REC (Last Updated: 1week ago) DC to DC switching regulator 5.5V 5mm 10A 200kHz~1.5MHz

BUCK, SYNCH, ADJ, 6A, 1.5MHZ, 34PQFN; Topology: Synchronous Buck (Step Down); Input Voltage Min: 7V; Input Voltage Max: 24V; No. of Outputs: 1Outputs; DC / DC Converter IC Case: QFN; No. of Pins: 34Pins; Output Current: 10A; Ou

The FAN23SV60 is a highly efficient integrated synchronous buck regulator. The regulator is capable of operating with an input range from 7 V to 24 V and supporting up to 10 A continuous load currents.The FAN23SV60 utilizes Fairchild’s constant on-time control architecture to provide excellent transient response and to maintain a relatively constant switching frequency. This device utilizes Pulse Frequency Modulation (PFM) mode to maximize light-load efficiency by reducing switching frequency when the inductor is operating in discontinuous conduction mode at light loads, while clamping the minimum frequency above the audible range with ultrasonic mode.Switching frequency and over-current protection can be programmed to provide a flexible solution for various applications. Output over-voltage, under-voltage, over-current, and thermal shutdown protections help prevent damage to the device during fault conditions. After thermal shutdown is activated, a hysteresis feature restarts the device when normal operating temperature is reached.