Microchip MCP130-485FI/TO

Processor Supervisor 4.725V 3V/3.3V/5V 3-Pin TO-92 Bag

System Supervisors - Power Supply Monitors with Reset Generators w/5K Pull-Up Low

Voltage Detector, 1V to 5.5V, TO-92-3, RoHS

Supervisor w/5K Pull-Up Active Low

Power Supply Support Circuit, Fixed, 1 Channel, +4.73V, CMOS, PBCY3

IC SUPERVISOR 1 CHANNEL TO92-3

Lead Free Active Low Active BOTTOM Simple Reset/Power-On Reset Supervisor -40C~85C TA 60muA 150ms Minimum 5V

Ic, volt Detector, fixed,+4.73V, cmos, sip,3Pin, plastic Rohs Compliant: Yes |Microchip Technology MCP130-485FI/TO

The Microchip Technology Inc. MCP120/130 is a volt-age supervisory device designed to keep a micro controller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage drops below a safe operating level. Both devices are available with a choice of seven different trip voltage sand both have open drain outputs. The MCP130 has an internal 5 k\Omega pull up resistor. Both devices have active low RESET pins. The MCP120/130 will assert the RESET signal whenever the voltage on the VDD pin is below the trip-point voltage.