Honeywell RTY180LVNAA

Fixed Resistor, Metal Glaze/thick Film, 0.66W, 0.03ohm, 1% +/-Tol, 350ppm/Cel, Surface Mount, 1210

INDUSTRIAL MOTION&POSITION SENSORS 180 DEG LOW V ROHS COMPLIANT: YES

180¡ã(¡À90) Increase Clockwise 5.5V ¡À1% Flatted Shaft 55mm*40.7mm

Rotary Position Sensor 5.5V 35MCycles Analog(Voltage) Output 3-Pin

SENSOR; ROTARY; 180 DEG.; LOW VOLTAGE; PINOUT N; VOLTAGE OP; LEVER A

Hall Effect Sensor, 180deg Max, 0.4-4.5V

SENSOR ROTARY 180DEG CONNECTOR

RTY Series with integral actuator, 180° (±90°) operating range, 5 Vdc supply voltage, North American pinout style; standard: 0.5 Vdc (left), 4.5 Vdc (right) ratiometric output, shaft with lever The RTY Series Hall-effect Rotary Position Sensors provide non-contact sensing in harsh transportation and industrial applications at a competitive cost. These shaft activated products are available in two versions: an integral shaft with or without a lever. The lever may allow customers to reduce the number of mechanical linkages required for their applications, which may reduce the cost of the overall customer solution. These products use a magnetically biased, Hall-effect integrated circuit (IC) to sense rotary movement of the actuator over a set operating range. Rotation of the actuator changes the magnet’s position relative to the IC. The resulting flux density change is converted to a linear output. The IC, together with conditioning and protection circuitry, is sealed in an IP69K-qualified rugged package for durability in most harsh environments. Eight operating ranges from 50° to 360° are tolerant to over-travel and allow use in most common applications. Low voltage and high voltage versions cover an input voltage range of 4.5 Vdc to 30 Vdc. Honeywell’s industry-leading capabilities in research and development provide the customer with known quality and support.