Honeywell MPRLS0001PG0000SA

PRESSURE SENSOR, 1PSI, 1PORT, 3.3V; Oper; Operating Pressure Max:1psi; Sensor Output:Digital;

Pressure Sensor 0psi to 1psi Gage 12-Pin T/R

Gage, 0Psi Min, 1Psi Max, 0.25%, 0.20-0.80V, Square, Board Mount

MICRO PRESSURE, AMPLIFIED, COMPE

MPRLS0001PG0000SA MICROPRESSURE

MicroPressure MPR Series, compensated/amplified, gage, leadless SMT long port, with silicone gel, 0 psi to 1 psi, 24-bit digital SPI output, 10% to 90% of 224 counts transfer function 60 mbar to 2.5 bar | 6 kPa to 250 kPa | 1 psi to 30 psi Description The MPR Series is a very small piezoresistive silicon pressure sensor offering a digital output for reading pressure over the specified full scale pressure span and temperature range. It is calibrated and compensated over a specific temperature range for sensor offset, sensitivity, temperature effects, and non-linearity using an on-board Application Specific Integrated Circuit (ASIC). This product is designed to meet the requirements of higher volume medical (consumer and non-consumer) devices and commercial appliance applications. Value to Customers Very small form factor: Enables portability by addressing weight, size, and space restrictions; occupies less area on the PCB. Wide pressure ranges simplify use. Enhances performance: Output accelerates performance through reduced conversion requirements and direct interface to microprocessors. Value Solution: Cost-effective, high volume solution with configurable options. Long port version meets IPC/JEDEC J-STD-020D.1 Moisture Sensitivity Level 1 requirements: Allows avoidance of thermal and mechanical damage during solder reflow attachment and/or repair that lesser rated sensors may incur; allows unlimited floor life when stored as specified (simplifying storage and reducing scrap); eliminates lengthy bakes prior to reflow, and allows for lean manufacturing due to stability and usability shortly after reflow. Differentiation: Application-specific design addresses specific application needs and challenges. Digital output: Plug and play feature enables ease of implementation and system level connectivity. Total Error Band: Provides true performance over the compensated temperature range, which minimizes the need to test and calibrate every sensor, thereby potentially reducing manufacturing cost; improves sensor accuracy and offers ease of sensor interchangeability due to minimal part-to-part variation.