Honeywell 23AC2

Snap Acting/Limit Switch, SPDT, Momentary, 0.5A, 125VDC, Screw Terminal, Rod Type Actuator, Panel Mount

Switch, DOOR, INTERLOCK, SPDT, ROD Actuator, 15 AMPS, SCREW TERMINATION

Electromechanical Switch Manual Switch Single Pole Double Throw 15A

V3 BASIC SWITCH HIGH STRENGTH THERMOPLASTIC ROD ACTUATOR W/TAPPED HOLE IN END W/LARGER BRACKET

23AC2, Honeywell, MICRO SWITCH AC Series Door Switch, SPDT - Single Pole Double Throw Circuitry, 15 A at 250 Vac, Rod Actuator, Silver Contacts, Screw Termination.

MICRO SWITCH™ Electromechanical Switches, MICRO SWITCH™ Basic Switches, MICRO SWITCH™ Special Application Precision Switches

DOOR SWITCH, SPDT, ON-OFF; Contact Configuration:SPDT; Contact Voltage AC Max:250V; Contact Voltage DC Max:250V; Contact Current AC Max:15A; Contact Current DC Max:500mA; Switch Operation:Off-On; Switch Terminals:Screw; Actuator Type:Rod; Contact Configuration:SPDT; Contact Rating:15A; Series:AC; Switch Operation:On-Off; Terminal Type:Screw; Termination Type:Screw

MICRO SWITCH™ AC Series Door Switches are used for simple or precision on/off application needs. They enable circuit testing with POWER ON by manually pulling a rod actuator to the maintained-ON position. Closing the door resets the switch.

MICRO SWITCH AC Series Door Switch, Single Pole Double Throw Circuitry, 15 A at 250 Vac, Rod Actuator, Silver Contacts, Screw Termination MICRO SWITCH AC Series switch assembly monitors the position of a service door or panel whether “closed” or “open”. The AC Series switches are a compact switch assembly designed for equipment applications. When the equipment (door or panel, etc.) which is electrically interlocked through the AC Series switch is opened, the action of the AC Series switch disconnects the electrical power. The AC Series switch can provide an electrical signal to an annunciator circuit such as a light or horn indicating the door or panel is open. AC Series switch assemblies are available with up to four switch elements which can provide discrete outputs as required for control and/or indicator circuits.