Texas Instruments TLV2775AIN

Op Amp Quad High Output Current Amplifier R-R O/P ±3V/6V 16-Pin PDIP Tube

IC CMOS 4 CIRCUIT 16DIP CMOS Amplifier 4 Circuit Rail-to-Rail 16-PDIP

Quad, 5.5-V, 5.1-MHz, 2.1-mV offset, high slew rate (10.5-V/μs) op amp with shutdown 16-PDIP -40 to 125

FAMILY OF 2.7-V HIGH-SLEW-RATE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS WITH SHUTDOWN | IC OPAMP GP 4 CIRCUIT 16DIP

QUAD OP-AMP 2200 uV OFFSET-MAX 4.8 MHz BAND WIDTH PDIP16

1mA(x4 Channels) 10.5V/μs 17nV/rtHz@ 5V 5.1MHz Rail to Rail 50mA 4 4 700μV 2pA CMOS PDIP-16 Through hole mounting 5.08mm(height)

ROHS3Compliant R-PDIP-T16 TLV2775 Nickel/Palladium/Gold (Ni/Pd/Au) op amp buffer circuit 19.305mm 0.00035muA 2.7/5V 5100kHz

Operational Amplifier (Op-Amp) IC; No. of Amplifiers:4; Op Amp Type:CMOS; Gain Bandwidth -3db:5.1MHz; Slew Rate:10.5V/µs; Supply Voltage Min:2.5V; Supply Voltage Max:6V; No. of Pins:16; Operating Temperature Range:-40°C to +125°C ;RoHS Compliant: Yes

The TLV277x CMOS operational amplifier family combines high slew rate and bandwidth, rail-to-rail output swing, high output drive, and excellent dc precision. The device provides 10.5 V/t,s of slew rate and 5.1 MHz of bandwidth while only consuming 1 mA of supply current per channel. This ac performance is much higher than current competitive CMOS amplifiers. The rail-to-rail output swing and high output drive make these devices a good choice for driving the analog input or reference of analog-to-digital converters. These devices also have low distortion while driving a 600-\Omega load for use in telecom systems. These amplifiers have a 360-t,V input offset voltage, a 17 nV/\Theta Hz input noise voltage, and a 2-pA input bias current for measurement, medical, and industrial applications. The TLV277x family is also specified across an extended temperature range (-40 oC to 125 oC), making it useful for automotive systems, and the military temperature range (-55oC to 125oC), for military systems. These devices operate from a 2.5-V to 5.5-V single supply voltage and are characterized at 2.7 V and 5 V. The single-supply operation and low power consumption make these devices a good solution for portable applications. The following table lists the packages available.