Texas Instruments LM4130AIM5-2.5/NOPB

IC VREF SERIES 2.5V SOT23-5 / V-Ref Precision 2.5V 20mA 5-Pin SOT-23 T/R

Linear Voltage Regulator IC 1 Output 150mA 5-μSMD (1.03x1.41)

The LM4130 family of precision voltage references performs comparable to the best laser-trimmed bipolar references, but in cost effective CMOS technology. Key to this break through is the use of EEPROM registers for correction of curvature, tempco, and accuracy on a CMOS band gap architecture that allows package level programming to overcome assembly shift. The shifts in voltage accuracy and tempco during assembly of die into plastic packages limit the accuracy of references trimmed with laser techniques. Unlike other LDO references, the LM4130 requires no output capacitor. Neither is a buffer amplifier required, even with loads up to 20mA. These advantages and the SOT23 packaging are important for cost-critical and space-critical applications. Series references provide lower power consumption than shunt references, since they don't have to idle the maximum possible load current under no load conditions. This advantage, the low quiescent current (75uA), and the low dropout voltage(275mV) make the LM4130 ideal for battery-powered solutions. The LM4130 is available in five grades (A, B, C, D and E) for greater flexibility. The best grade devices (A) have an initial accuracy of 0.05% with guaranteed temperature coefficient of 10ppm/*C or less, while the lowest grade parts (E) have an initial accuracy of 0.5% and a tempco of 30ppm/*C.