Renesas CA5420AMZ96

Tin Not Qualified GULL WING 1998 OPERATIONAL AMPLIFIER Amplifier 75dB 0.5V/mus 125C 500kHz

OP-AMP, 10000uV OFFSET-MAX, 0.5MHz BAND WIDTH, PDSO8, ROHS COMPLIANT, SOIC-8

Operational Amplifiers - Op Amps W/ANNEAL OPAMP 1 5MHZ LWBIAS 0 001NA

Operational Amplifier, 1 Func, 10000uV Offset-Max, BIMOS, PDSO8

Ic,operational Amplifier,single,bipolar/Mos,sop,8Pin,plastic Rohs Compliant: Yes |Renesas CA5420AMZ96

The CA5420A is an integrated circuit operational amplifier that combines PMOS transistors and bipolar transistors on a single monolithic chip. It is designed and guaranteed to operate in microprocessor logic systems that use V+ = 5V, V- = GND, since it can operate down to ±1V supplies. It will also be suitable for 3. 3V logic systems. The CA5420A BiMOS operational amplifier features gate-protected PMOS transistors in the input circuit to provide very high input impedance, very low input currents (less than 1pA). The internal bootstrapping network features a unique guardbanding technique for reducing the doubling of leakage current for every +10°C increase in temperature. The CA5420A operates at total supply voltages from 2V to 20V either single or dual supply. This operational amplifier is internally phase compensated to achieve stable operation in the unity gain follower configuration. Additionally, it has access terminals for a supplementary external capacitor if additional frequency roll-off is desired. Terminals are also provided for use in applications requiring input offset voltage nulling. The use of PMOS in the input stage results in common-mode input voltage capability down to 0. 45V below the negative supply terminal, an important attribute for single supply application. The output stage uses a feedback OTA type amplifier that can swing essentially from rail-to-rail. The output driving current of 1. 0mA (Min) is provided by using nonlinear current mirrors. This device has guaranteed specifications for 5V operation over the full military temperature range of -55°C to +125°C. The CA5420A has the same 8 lead pinout used for the industry standard 741.