onsemi FPF2701MX

Current Limit SW 1-IN 1-OUT 2.8V to 36V 2A 8-Pin SOIC T/R

Tape & Reel (TR) FPF2701 Current Limiting (Adjustable) Over Temperature UVLO e4 power distribution switch 4.9mm 36V 2A 1W

SWITCH, LOAD, 0.4-2.0A, 8SO; Input Voltage:36V; Current Limit:2A; On State Resistance:0.088ohm; Distribution Switch Case Style:SOIC; No. of Pins:8; Thermal Protection:Yes; On / Enable Input Polarity:Active Low; Power Dissipation Pd:1W; No. of Outputs:1; Operating Temperature Range:-40°C to +125°C; MSL:MSL 1 - Unlimited; Internal Switch:Yes

The AccuPower™ FPF270X series is a family of current-limit load switches that provide full protection to systems and loads from excess current conditions. Minimum current limit is adjustable from 0.4 A to 2.0 A. The FPF270X contains a slew-rate-controlled N-channel MOSFET and slew-rated turn-on to prevent power bus disturbances from being caused by "hot plugging" loads or momentary excess load demands. The input voltage range is 2.8 V to 36 V. Loads can be activated or deactivated with a low-voltage logic-compatible ON pin. Fault conditions can be monitored using the error flag pin and/or the power-good pin. Each member of the FPF270X family serves a category of load-fault response. All devices clamp the load current so that it cannot exceed an externally programmed current level. An over temperature feature provides further device protection in case of excessive levels of power dissipation. FPF2701 responds to an overload condition that lasts longer than a fixed blanking period by latching off the load. The load remains off unless either the ON pin is toggled or the input voltage cycles through UVLO. The FPF270X is available in a space-saving Pb and Halogen free, 8-lead MLP 3x3 mm and SO8 packages.