onsemi CAT32TDI-GT3

CAT32 Series 40 mA 7 V 1.2 MHz Surface Mount 4 White CMOS LED Driver - TSOT-23-6

CAT32TDI-GT3, LED DISPLAY DRIVER 4-SEGMENTS, 2 - 7 V, 6-PIN TSOT-23

Tape & Reel (TR) CAT32 Step-Up (Boost) PWM led driver 2.9mm 700muA 7V 1.2MHz

LED DRIVER, BOOST, 1.2MHZ, TSOT-23; Device Topology: Boost (Step Up); Input Voltage Min: 2V; Input Voltage Max: 7V; Output Voltage Max: 20V; Output Current Max: 40mA; Available until stocks are exhausted Alternative available

The CAT32 is a DC/DC step up converter that delivers a regulated output current. Operation at a constant switching frequency of 1.2MHz allows the device to be used with very small value external inductor and ceramic capacitors. The CAT32 is targeted to drive multiple white light-emitting diodes (LEDs) connected in series and provides the necessary regulated current to control the brightness and the color purity. An external resistor RSET controls the output current level. LED currents of up to 40mA can be supported over a wide range of input supply voltages from 2V to 7V making the device ideal for battery-powered applications. A high voltage output stage allows up to 4 White LEDs to be driven in series. Series drive provides inherent current matching. LED dimming can be done by using a DC voltage a logic signal or a pulse width modulation (PWM) signal. The shutdown input pin allows the device to be placed in power-down mode with near zero quiescent current. In addition to overcurrent limiting protection the device also includes detection circuitry to ensure protection against open-circuit load fault conditions. The device is available in a low profile (1mm max height) 6-lead TSOT-23 package.