Infineon TLE7250XLEXUMA1

IC TRANSCEIVER HALF 1/1 TSON-8 / 1/1 Transceiver Half CANbus PG-TSON-8-1

Half Duplex ROHS3Compliant NO LEAD Half Transceiver 1Mbps 3mm 13A 5V

CAN 2Mbps Power Down 3.3V/5V Automotive 8-Pin TSON EP T/R

2.0MBit/s, CAN FD Transceiver, PG-TSON-8, RoHS

1Mbps Transceiver TSON-8-1 CAN ICs ROHS

TSON-8-EP(3x3) CAN Transceivers ROHS

CAN TX RX, 2MBPS, -40 TO 150DEG C, TSON8; CAN Interface IC Type:CAN FD Transceiver; Data Rate Max:2Mbps; Supply Voltage Min:4.5V; Supply Voltage Max:5.5V; IC Case / Package:TSON; No. of Pins:8Pins; No. of Channels:1Channels RoHS Compliant: Yes

As an interface between the physical bus layer and the CAN protocol controller, the TLE7250X drives the signals to the bus and protects the microcontroller against interferences generated within the network. Based on the high symmetry of the CANH and CANL signals, the TLE7250X provides a very low level of electromagnetic emission (EME) within a wide frequency range. The TLE7250X is available in a small, leadless PG-TSON-8 package and in a PG-DSO-8 package. Both packages are RoHS compliant and halogen free. Additionally the PG-TSON-8 package supports the solder joint requirements for automated optical inspection (AOI). The TLE7250XLE and the TLE7250XSJ are fulfilling or exceeding the requirements of the ISO11898-2. The TLE7250X provides a digital supply input VIO and a receive-only mode. It is designed to fulfill the enhanced physical layer requirements for CAN FD and supports data rates up to 2 MBit/s. On the basis of a very low leakage current on the HS CAN bus interface the TLE7250X provides an excellent passive behavior in power-down state. These and other features make the TLE7250X exceptionally suitable for mixed supply HS CAN networks. Based on the Infineon Smart Power Technology SPT, the TLE7250X provides excellent ESD immunity together with a very high electromagnetic immunity (EMI). The TLE7250X and the Infineon SPT technology are AEC qualified and tailored to withstand the harsh conditions of the automotive environment. Two different operating modes, additional fail-safe features like a TxD time-out and the optimized output slew rates on the CANH and CANL signals, make the TLE7250X the ideal choice for large HS CAN networks with high data transmission rates.