Infineon PVD1352NSPBF

PVD Photovoltaic 0.55 A 100 V 1.5 Ohm SPST (1 Form A) Solid State Relay -MDIP-8

Relay SSR 25mA DC-IN 0.55A 100V DC-OUT 4-Pin PDIP SMD Tube

Relay;Solid State;SPST-NO;Ctrl-V 1.25DC;0.55A;100VDC;PCB Mnt;SMD;4Pin;PVD13N

MOSFET RELAY, 0.55A, 100VDC, SMD; Contact Configuration: SPST-NO; Load Current: 550mA; Relay Terminals: SMD; Load Voltage Max: 100VDC; On State Resistance Max: 1.5ohm; Isolation Voltage: 4kV; Forward Current If: 25mA; Product R

DC Relay; Load Current RMS Max:550mA; Relay Terminals:SMD; Contacts:SPNO; Leaded Process Compatible:Yes; Load Current:550mA; Output Device:MOSFET; Peak Reflow Compatible (260 C):Yes; Switch Function:SPST-NO ;RoHS Compliant: Yes

Contact Configuration = 1NO / Termination Type = Gull Wing Terminal / Mounting Type = SMD / Width mm = 6.5 / Length mm = 9.4 / Load Voltage Max. V = 100 / Load Current Max. mA = 550 / Load Voltage Min. V = 0 / Height mm = 3.9 / Package Type = SMD-8

100 V, 375 mA single pole Photovoltaic Relay in a mod. 8-pin SMT. This normally open solid-state relay can replace electromechanical relays used for general purpose switching of analog signals. The PVA13 Series overcomes the limitations of both conventional electromechanical and reed relays by offering the solid state advantages of long life, fast operating speed, low pick up power, bounce-free operation, low thermal offset voltages and miniature package. These advantages allow product improvement and design innovations in many applications such as process control, multiplexing, automatic test equipment and data acquisition. The PVA13 can switch analog signals from thermocouple level to 100 Volts peak AC or DC polarity. Signal frequencies into the RF range are easily controlled and switching rates up to 450Hz are achievable. The extremely small thermally generated offset voltages allow increased measurement accuracies.