Infineon IR2302PBF

RoHS Compliant Active Tin/Lead (Sn/Pb) e0 IC Gate Driver 9.865mm 15V 0.2A 150C

IR2302 Series 20 V 200 mA Through Hole Half-Bridge Driver - PDIP-8

600 V half-bridge gate driver IC with shutdown, PDIP8, RoHS

MOSFET DRVR 600V 0.35A 2-OUT Hi/Lo Side Half Brdg Inv/Non-Inv 8-Pin PDIP Tube

Half Bridge Based IGBT/MOSFET Driver, 0.2A, CMOS, PDIP8

No. of Channels:2Channels; Driver Configuration:Half Bridge; Power Switch Type:IGBT, MOSFET; No. of Pins:8Pins; Driver Case Style:DIP; Input Type:Non-Inverting; Source Current:200mA; Sink Current:350mA; Supply Voltage Min:5V; MSL:- RoHS Compliant: Yes

DRIVER, HALF BRIDGE SINGLE IN, 2302; Driver IC Type:MOSFET; No. of Outputs:2; Voltage, Output:620V; Voltage, Supply Min:5V; Case Style:DIP; No. of Pins:8; Operating Temperature Range:-40°C to +150°C; Base Number:2302; IC Generic Number:2302; Logic Function Number:2302; Temp, Op. Max:150°C; Temp, Op. Min:-40°C; Termination Type:Through Hole; Voltage, Offset:600V; Voltage, Output Max:25V; Voltage, Output Min:10V; Voltage, Supply Max:20V; Logic IC Function:Half-Bridge Driver; Max Output Source Current:200mA; Min Output Sink Current:250mA; Min Output Source Current:120mA; Output Sink Current:350mA; Voltage, Vcc Max:25V; Voltage, Vcc Min:10V

600 V Half Bridge Driver IC with typical 0.2 A source and 0.35 A sink currents in 8 Lead PDIP package for IGBTs and MOSFETs. Also available in 8 Lead SOIC. | Summary of Features: Floating channel designed for bootstrap operation; Fully operational to +600 V; Tolerant to negative transient voltage; dV/dt immune; Gate drive supply range from 5 to 20 V; Undervoltage lockout for both channels; 3.3 V, 5 V and 15 V input logic compatible; Cross-conduction prevention logic; Matched propagation delay for both channels; High side output in phase with IN input; Logic and power ground +/- 5 V offset; Internal 540ns dead-time; Lower di/dt gate driver for better noise immunity; Shut down input turns off both channels; 8-Lead SOIC also available LEAD-FREE (PbF)