Honeywell RTY060LVEAX

Hall Effect 60¡ã(¡À30) Increase Clockwise 5.5V ¡À1% Flatted Shaft 55mm*25mm*40.6mm

HALL EFFECT ROTARY SENSOR, 60DEG, 5VDC; Supply Voltage DC Min: 5V; Supply Voltage DC Max: 5.5V; Sensor Terminals: Connector; Sensor Housing: Flange Mount; Output Configuration: Ratiometric; Output Voltage Min: 500mV; Switching

Sensor, Rotary, Hall Effect, 60Deg; Sensor Type:Hall-Effect Rotary Position Sensor; Shaft Type:D Type Flatted End; Contact Type:Non-Contact; Electrical Angle:60°; Linearity:± 1%; Supply Voltage:5Vdc; Supply Current:20Ma Rohs Compliant: Yes |Honeywell RTY060LVEAX

RTY Series with integral actuator, 60° (±30°) operating range, 5 Vdc supply voltage, European pinout style; standard: 0.5 Vdc (left), 4.5 Vdc (right) ratiometric output, shaft without lever The RTY Series Hall-effect Rotary Position Sensors provide non-contact sensing in harsh transportation and industrial applications at a competitive cost. These shaft activated products are available in two versions: an integral shaft with or without a lever. The lever may allow customers to reduce the number of mechanical linkages required for their applications, which may reduce the cost of the overall customer solution. These products use a magnetically biased, Hall-effect integrated circuit (IC) to sense rotary movement of the actuator over a set operating range. Rotation of the actuator changes the magnet’s position relative to the IC. The resulting flux density change is converted to a linear output. The IC, together with conditioning and protection circuitry, is sealed in an IP69K-qualified rugged package for durability in most harsh environments. Eight operating ranges from 50° to 360° are tolerant to over-travel and allow use in most common applications. Low voltage and high voltage versions cover an input voltage range of 4.5 Vdc to 30 Vdc. Honeywell’s industry-leading capabilities in research and development provide the customer with known quality and support.