Analog Devices LT8608IMSE#TRPBF

Switching Regulator, Current-mode, 2200kHz Switching Freq-Max, BIPolar, PDSO10

Sp-Swreg/Monolithic 42V/1.5A Peak Synchronous Step-Down Regulator With 2.5Ua Quiescent Current

4.2-V to 42-V, 1.5-A ultra-small synchronous step-down converter 12-VQFN-HR -40 to 125

Conv DC-DC 3V to 42V Synchronous Step Down Single-Out 0.778V to 41.5V 1.5A Automotive 10-Pin MSOP EP T/R

Buck Yes 200KHz~2MHz Adjustable 1 42V 778mV 42V 3V MSOP-10

The LT8608 is a compact, high efficiency, high speed synchronous monolithic step-down switching regulator that consumes only 1.7µA of quiescent current. The LT8608 can deliver 1.5A of continuous current. Low ripple Burst Mode operation enables high efficiency down to very low output currents while keeping the output ripple below 10mV. Internal compensation with peak current mode topology allows the use of small inductors and results in fast transient response and good loop stability. The EN/ UV pin has an accurate 1V threshold and can be used to program VIN undervoltage lockout or to shut down the LT8608. The PG flag signals when VOUT is within ±8.5% of the programmed output voltage as well as fault conditions. The MSOP package includes a SYNC pin to synchronize to an external clock, or to select Burst Mode operation or pulse-skipping with or without spread-spectrum; the TR/SS pin programs soft-start or tracking. The DFN package omits these pins and can be purchased in pulse-skipping or Burst Mode operation varieties. Applications General Purpose Step Down Low EMI Step Down