Analog Devices AD9668ACPZ-R7

Lead Free Tape and Reel RoHS Compliant op amp buffer circuit 5.5V

4.5V~5.5V LFCSP-32-VQ(5x5) Laser Drivers ROHS

Laser Driver 4-CH 32-Pin LFCSP EP T/R

IC LDD 4CH LVDS DUAL OUT 32LFCSP

The AD9668 is a laser diode driver for high performance CD-RW and DVD recordable drives. It includes four channels for four different optical power levels; the Read Channel generates a continuous output power level, whereas Channel 1, Channel 2, and Channel 3 can be used as write channels that can be controlled with either an LVDS or a TTL interface. The OSCEN pin is also controlled by either an LVDS or a TTL signal. All channels are summed at the selected LD output pin, where Write Channel 1 can contribute at least 275 mA output current and Write Channel 2 and Write Channel 3 can contribute at least 170 mA and 150 mA, respectively. The level of the output current is set by an external resistor, which converts an input voltage into a current at the xSET pins. An on-chip oscillator is provided to allow output current modulation and to reduce laser mode hopping. Four external resistors permit the setting of two different values for both oscillator frequency and amplitude, one for each output. The oscillator can output up to 100 mA p-p of current (push-pull oscillator) with a frequency range of 200 MHz to 500 MHz.