Texas Instruments SN74ABT863NT

Bus Transceiver Single 9-Channel 3-State 24-Pin PDIP Tube

IC TXRX NON-INVERT 5.5V 24DIP / Transceiver, Non-Inverting 1 Element 9 Bit per Element 3-State Output 24-PDIP

ABT SERIES 9-BIT TRANSCEIVER TRUE OUTPUT PDIP24

Non-Inverting Transceiver, Tri-State, 1-Ch, 9-Ch, 4.5V-5.5V, 24mA/64mA, 32mA, PDIP-24, TH, 31.64mm × 6.73mm × 4.57mm

ROHS3Compliant BIDIRECTIONAL DUAL BICMOS Logic Transceiver, Non-Inverting -40C~85C TA 50pF 5V 5.08mm

The 'ABT863 devices are 9-bit transceivers designed for asynchronous communication between data buses. The control-function implementation allows for maximum flexibility in timing. These devices allow noninverted data transmission from the A bus to the B bus or from the B bus to the A bus, depending on the logic levels at the output-enable (OEAB\ and OEBA\) inputs. The outputs are in the high-impedance state during power up and power down. The outputs remain in the high-impedance state while the device is powered down. When VCC is between 0 and 2.1 V, the device is in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 2.1 V, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. The SN54ABT863 is characterized for operation over the full military temperature range of -55C to 125C. The SN74ABT863 is characterized for operation from -40C to 85C.