Texas Instruments ADC08831IM/NOPB

ADC Single SAR 181KSPS 8-Bit Serial 8-Pin SOIC N Rail

8-Bit, 1-Ch, Serial I/O CMOS A/D Converters with Multiplexer and Sample/Hold Function 8-SOIC -40 to 85

8-SOIC (0.154 3.90mm Width) ADC08831 Serial ACTIVE (Last Updated: 3days ago) analog digital converter 1.58mm 1.7mA 181ksps 8.5mW

4.5V~6V 48.5dB 250Ksps 8bit 1-Ch DSP, SPI, Diff/Pseudo-Diff/Single-Ended 4.5V~6V SAR ADC SOIC-8 SMD 4.9mm × 3.9mm × 1.45mm

IC, 8BIT ADC, SERIAL I/O, 8-SO; Resolution (Bits):8bit; Data Interface:Serial, 3-Wire; Supply Voltage Range - Analogue:4.5V to 6V; Supply Current:1.7mA; IC Case Style:SOIC; No. of Pins:8; Operating Temperature Range:-40°C to +85°C; SVHC:No SVHC (20-Jun-2011); Base Number:8831; Digital IC Case Style:SOIC; Input Channel Type:Pseudo Differential, Single Ended; Input Type:Pseudo-Differential, Single Ended; Interface Type:3-Wire, Serial; No. of Channels:1; Package / Case:SOIC; Sample Rate:250KSPS; Supply Voltage Max:6V; Supply Voltage Min:4.5V; Termination Type:SMD

The ADC08831/ADC08832 are 8-bit successive approxima-tion Analog to Digital converters with 3-wire serial interfaces and a configurable input multiplexer for 2 channels. The se-rial I/O will interface to COPS (TM)family of micro-controllers, Pl D's, microprocessors, DSP's, or shift registers. The serialI/O is configured to comply with the NSC MICRO WIRE (TM) serial data exchange standard. To minimize total power consumption, theADC08831/ADC08832 automatically go into low power mode whenever they are not performing conversions. A track/hold function allows the analog voltage at the positive input to vary during the actual A/D conversion. The analog inputs can be configured to operate in various combinations of single-ended, differential, or pseudo-differential modes. The voltage reference input canbe adjusted to allow encoding of small analog voltage spans to the full 8-bits of resolution.