STMicroelectronics LD1086D2MTR

88dB(120Hz) 10mA Adjustable 1.5A 1 1.25V 30V 28.5V 30V 1.5V@ 1.5A 0.3% 0.2% D2PAK 4.6mm

LD1086D2MTR, LDO VOLTAGE REGULATOR, ADJUSTABLE 1.5A,1.25 TO 15V +/-1%,4-PIN D2PAK

LDO VLT REG, 1.5A, 1.275-1.225V, TO263AA; Output Type: Adjustable; Input Voltage Min: -; Input Voltage Max: 30V; Fixed Output Voltage Nom.: -; Adjustable Output Voltage Min: 1.8V; Adjustable Output Voltage Max: 12V; Output Cur

The LD1086 is a LOW DROP Voltage Regulator able to provide up to 1.5A of output current. Dropout is guaranteed at a maximum of 1.2V at the maximum output current, decreasing at lower loads. The LD1086 is pin to pin compatible with the older 3-terminal adjustable regulators, but has better performances in term of drop and output tolerance. A 2.85V output version is suitable for SCSI-2 active termination. Unlike PNP regulators, where a part of the output current is wasted as quiescent current, the LD1086 quiescent current flows into the load, so increase efficiency. Only a 10uF minimum capacitor is need for stability. The device is supplied in TO-220, D2PAK, D 2PAK/A and DPAK. On chip trimming allows the regulator to reach a very tight output voltage tolerance, within +-1% at 25oC.