onsemi MM74HC573SJX

8¦ÌA 15ns 1 2V 6V 7.8mA D-Type Transparent Latch HC 1 7.8mA SOP-20 , 12.6mm*5.3mm*1.8mm

74HC573 Tape & Reel (TR) HC/UH 74HC latch circuit 7.8mA 7.8mA 26ns 481.5mg -40C~85C

Ic,latch,single,8-Bit,hc-Cmos,sop,20Pin,plastic Rohs Compliant: Yes

2V~6V D-Typelocking Latch SOP-20-208mil Latches ROHS

Latch Transparent 3-ST 8-CH D-Type 20-Pin SOP-II T/R

Bus Driver, HC/UH Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20

IC LATCH OCTAL D 3STATE 20-SOP

IC D-TYPE TRANSP SGL 8:8 20SOP

The MM74HC573 high speed octal D-type latches utilize advanced silicon-gate P-well CMOS technology. They possess the high noise immunity and low power consumption of standard CMOS integrated circuits, as well as the ability to drive 15 LS-TTL loads. Due to the large output drive capability and the 3-STATE feature, these devices are ideally suited for interfacing with bus lines in a bus organized system. When the LATCH ENABLE(LE) input is HIGH, the Q outputs will follow the D inputs. When the LATCH ENABLE goes LOW, data at the D inputs will be retained at the outputs until LATCH ENABLE returns HIGH again. When a HIGH logic level is applied to the OUTPUT CONTROL OC input, all outputs go to a HIGH impedance state, regardless of what signals are present at the other inputs and the state of the storage elements. The 74HC logic family is speed, function and pinout compatible with the standard 74LS logic family. All inputs are protected from damage due to static discharge by internal diode clamps to VCC and ground.