onsemi FSL336LRLX

650V Integrated Power Switch with Error Amp and no bias winding for 9Watt offline buck converters

ACTIVE (Last Updated: 1day ago) Current Limiting Open Loop Over Load Over Temperature Over Voltage Tape & Reel (TR) 8541.29.00.95 dc ac converter 650V 776.7mg 20W 50kHz

AC/DC CONV, BUCK, 26V, LSOP-7; Input Voltage AC Min: -; Input Voltage AC Max: 26V; AC / DC Converter Case Style: LSOP; No. of Pins: 7Pins; Power Rating: 20W; Topology: Buck (Step Down); Operating Temperature Min: -40°C; Operati

The FSL336LR integrated Pulse Width Modulator (PWM) and SenseFET is specifically designed for high-performance offline buck, buck-boost, and non-isolation flyback Switched Mode Power Supplies (SMPS) with minimal external components. This device integrates a high-voltage power regulator that enables operation without auxiliary bias winding. An internal transconductance amplifier reduces external components for the feedback compensation circuit.The integrated PWM controller includes: 10 V regulator for no external bias circuit, Under-Voltage Lockout (UVLO), Leading-Edge Blanking (LEB), an optimized gate turn-on / turn-off driver, EMI attenuator, Thermal Shutdown (TSD), temperature-compensated precision current sources for loop compensation, and fault-protection circuitry. Protections include: Overload Protection (OLP), Over-Voltage Protection (OVP), and Feedback Open Loop Protection (FB_OLP). FSL336LR offers good soft-start performance during startup.The internal high-voltage startup switch and the Burst-Mode operation with very low operating current reduce the power loss in Standby Mode. As the result, it is possible to reach power loss of 120 mW without external bias and 25 mW with external bias when input voltage is 230 VAC.