onsemi FPF2194

IC PWR SWITCH P-CHAN 1:1 6WLCSP / Full Function Load Switch with Adjustable Current Limit

Load switch, Adjustable, 1 Channel, PBGA6

WLCSP-6(0.96x1.66) Power Distribution Switches ROHS

Load Switches Full Funct Load w/Adj Curr Limit

Current Limit Load Switch Rohs Compliant: Yes

Power Switch 0.6A 6-Pin CSP T/R

POWER LOAD SW, HIGH SIDE, -40 TO 85DEG C;

IC LOAD SWITCH FULL FUNCT 6WLCSP

Tape & Reel (TR) FPF2194 Current Limiting (Adjustable) Over Temperature Reverse Current UVLO e1 power distribution switch 980mum 5.5V 20mus 1.5A

The FPF2194 load switch provides full protection to systems and loads that may encounter large current conditions. These devices contain a 55mΩ current-limited Pchannel MOSFET that can operate over an input voltage range of 1.8 to 5.5V. Internally, current is prevented from flowing when the MOSFET is off and the output voltage is higher than the input voltage. Switch control is by a logic input (ON) capable of interfacing directly with low-voltage control signals. Each part contains thermal shutdown protection that shuts off the switch to prevent damage to the part when a continuous over-current condition causes excessive heating. When the switch current reaches the current limit, the parts operate in a constant-current mode to prohibit excessive currents from causing damage. For the FPF2194, if the constant current condition still persists after 30ms, the parts shut off the switch and pull the fault signal pin (FLAGB) LOW. The FPF2194 does not have this auto-restart feature, so the switch remains off until the ON pin is cycled. The minimum current limit is 100mA. These parts are available in a space-saving six ball advanced 1 x 1.5mm WLCSP package.