onsemi FIN324CGFX

UltraLow Power Serializer Deserializer 42-Pin USS-BGA T/R

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, PBGA42

IC, SERDES, 15MHZ, 24BIT, BGA-42 - More Details

Display Drivers & Controllers Serializer/Deseriali 24-Bit ULP

24-Bit Ultra-Low Power Serializer Deserializer Supporting Single and Dual Displays (*Recommended for new designs)

LINE TRANSCEIVER FIN324C Tape & Reel (TR) LVCMOS interface deserializer 4.5mm 1.6V~3V 15MHz -30C~85C TA

LINE TRANSCEIVER, 1 FUNC, 1 DRIV

; Supply Voltage Min:1.6V; Supply Voltage Max:3V; Termination Type:SMD; Package/Case:42-BGA; No. of Pins:42; Operating Temperature Range:-30°C to +85°C; Interface Type:Parallel; Leaded Process Compatible:Yes; No. of Bits:24 ;RoHS Compliant: Yes

The FIN324C is a 24-bit serializer / deserializer with dual strobe inputs. The device can be configured as a master or slave device through the master/slave select pin (M/S). This allows for the same device to be used as either a serializer or deserializer, minimizing component types in the system. The dual strobe inputs allow implementation of dual-display systems with a single pair of µSerDes. The FIN324C can accommodate RGB, microcontroller, or SPI mode interfaces. Read and write transactions are supported when operating with a microcontroller interface for one or both displays. Unlike other SerDes solutions, no external timing reference is required for operation. The FIN324C is designed for ultra-low power operation. Reset (/RES) and standby (/STBY) signals put the device in an ultra-low power state. In standby mode, the outputs of the slave device maintain state, allowing the system to resume operation from the last-known state. The device utilizes Fairchild’s proprietary ultra-low power, low-EMI Current Transfer Logic™ (CTL) technology. The serial interface disables between transactions to minimize EMI at the serial interface and to conserve power. CMOS parallel output buffers have been implemented with slew rate control to adjust for capacitive loading and to minimize EMI. ±