onsemi FAN3225CMPX

Tape & Reel (TR) FAN3225 Low-Side 2014 gate driver 12ns -40C~125C TA 5A 5A 540mW

12ns 2 4.5V 29ns 18V Inverting,Non-Inverting MOSFET,N 9ns 5A,5A MLP-8 , 3mm*3mm*750¦Ìm

CMOS input, dual inverting or non-inverting output, peak 5A sink, 5A source current Low-Side Gate Driver

Low Side MOSFET 5A 4.5V~18V 5A MLP-8 Gate Drive ICs ROHS

Driver 5A 2-OUT Low Side Inv/Non-Inv 8-Pin MLP EP T/R

Full Bridge Based Peripheral Driver, DSO8

DUAL 4-A HIGH-SPEED, LOW-SIDE GATE DRIVERS

DRIVER, MOSFET, DUAL OR, 4A, CMOS, 8MLP

Drivers Dual 4A W/Dual CMOS Inputs

DRIVER, MOSFET, DUAL OR, 4A, CMOS, 8MLP; Device Type:MOSFET; Module Configuration:Low Side; Peak Output Current:5A; Supply Voltage Range:4.5V to 18V; Driver Case Style:MLP; No. of Pins:8; Output Delay:18ns; Operating Temperature Range:-40°C to +125°C; MSL:MSL 1 - Unlimited

The FAN3223-25 family of dual 4A gate drivers is designed to drive N-channel enhancement-mode MOSFETs in low-side switching applications by providing high peak current pulses during the short switching intervals. The driver is available with either TTL or CMOS input thresholds. Internal circuitry provides an under-voltage lockout function by holding the output LOW until the supply voltage is within the operating range. In addition, the drivers feature matched internal propagation delays between A and B channels for applications requiring dual gate drives with critical timing, such as synchronous rectifiers. This also enables connecting two drivers in parallel to effectively double the current capability driving a single MOSFETS. The FAN322X drivers incorporate MillerDrive™ architecture for the final output stage. This bipolar-MOSFET combination provides high current during the Miller plateau stage of the MOSFET turn-on / turn-off process to minimize switching loss, while providing rail-to-rail voltage swing and reverse current capability. The FAN3223 offers two inverting drivers and the FAN3224 offers two non-inverting drivers. Each device has dual independent enable pins that default to ON if not connected. In the FAN3225, each channel has dual inputs of opposite polarity, which allows configuration as non-inverting or inverting with an optional enable function using the second input. If one or both inputs are left unconnected, internal resistors bias the inputs such that the output is pulled LOW to hold the power MOSFET OFF.