Analog Devices AD8065ARZ-REEL7

Op Amp Single High Performance Amplifier R-R O/P ±12V/24V 8-Pin SOIC N T/R

ROHS3Compliant EAR99 AD8065 Tape & Reel (TR) op amp buffer circuit 4.9mm 0.000006muA 9V 100dB

OP-AMP, 145MHZ, -40 TO 85DEG C, NSOIC-8; Available until stocks are exhausted

High Performance, 145 MHz FastFET™ Op Amps | IC OPAMP VFB 1 CIRCUIT 8SOIC

Operational Amplifiers; AD8065ARZ-REEL7; ANALOG DEVICES; 1.5 mV; 1; 7.4 mA; 100 dB

6.6mA 180V/¦Ìs 7nV/rtHz@ 5V 145MHz 90dB Rail to Rail 30mA 1 1 5V ¡À12V,24V 400¦ÌV 3pA 145MHz Voltage Feedback SOIC-8 , 1.75mm

The AD8065/AD8066 FastFET™ amplifiers are voltage feedback amplifiers with FET inputs offering high performance and ease of use. The AD8065 is a single amplifier, and the AD8066 is a dual amplifier. These amplifiers are developed in the Analog Devices, Inc. proprietary XFCB process and allow exceptionally low noise operation (7.0 nV/vHz and 0.6 fA/vHz) as well as very high input impedance. With a wide supply voltage range from 5 V to 24 V, the ability to operate on single supplies, and a bandwidth of 145 MHz, the AD8065/AD8066 are designed to work in a variety of applications. For added versatility, the amplifiers also contain rail-to-rail outputs. Despite the low cost, the amplifiers provide excellent overall performance. The differential gain and phase errors of 0.02% and 0.02°, respectively, along with 0.1 dB flatness out to 7 MHz, make these amplifiers ideal for video applications. Additionally, they offer a high slew rate of 180 V/µs, excellent distortion (SFDR of -88 dBc @ 1 MHz), extremely high common-mode rejection of -100 dB, and a low input offset voltage of 1.5 mV maximum under warmed up conditions. The AD8065/AD8066 operate using only a 6.4 mA/amplifier typical supply current and are capable of delivering up to 30 mA of load current. The AD8065/AD8066 are high performance, high speed, FET input amplifiers available in small packages: SOIC-8, MSOP-8, and SOT-23-5. They are rated to work over the industrial temperature range of -40°C to +85°C.