Power-One DFC10E12S5
Obsolete
Precio y existencias
Distribuidores autorizados
Distribuidores no autorizados
Vendedores no autorizados
Fichas técnicas y documentos
Descargar fichas técnicas y documentación del fabricante para Power-One DFC10E12S5.
Cadena de suministros
Export Control Classification Number (ECCN) CodeEAR99
Introduction Date1996-07-01
Lifecycle StatusObsolete (Last Updated: 4 months ago)
LTB Date2020-09-30
LTD Date2020-12-31
Componentes relacionados
Recom PowerRP10-2405SEW
10W DC/DC-Converter 'POWERLINE' 2 x1 1.6kV reg 4; V. In: 9-36; V. Out: 05; mA. Out: 2000
Recom PowerRP10-2405SEW/M2
10W DC/DC-Converter 'POWERLINE' 2 x1 1.6kV reg 4; V. In: 9-36; V. Out: 05; mA. Out: 2000
Recom PowerRP15-1215SA
15W DC/DC-Converter 'POWERLINE' 1 x1 1.6kV reg 2; V. In: 9-18; V. Out: 15; mA. Out: 1000
Descripciones
Descripciones de Power-One DFC10E12S5 suministradas por sus distribuidores.
DC-DC Regulated Power Supply Module, 2 Output, 10W, Hybrid
Module DC-DC 12VIN 1-OUT 5V 2A 10W 4-Pin
DC/DC CONVERTERS, SINGLE OUTPUT, 10 WATTS
Model numbers highlighted in yellow or shaded are not recommended for new designs. REV. JUN 01, 2004 Page 2 of 3 DFC10 Single-Output DC-DC Series Data Sheet NOTES(1) All parameters measured at Tc = 25oC, nominal input voltage and full rated load unless otherwise noted.(2) Noise measurement bandwidth is 0-20 MHz for peak-peak measurements, 10 kHz to 1 MHz for RMS measurements. Output noise is measured with a 0.01uF / 100V ceramic capacitor in parallel with a 1uf / 35V Tantalum capacitor, 1 inch from the output pins to simulate standard PCB decoupling capacitance. (3) Short term stability is specified after a 30 minute warm up at full load,constant line and recording the drift over a 24 hour period. (4) The input ripple rejection is specified for DC to 120 Hz ripple with amodulation amplitude of 1% of Vin.
Alias de fabricantes
Power-One tiene diversas marcas a nivel mundial que los distribuidores pueden usar como nombres alternativos. Power-One también podría ser conocido por los siguientes nombres:
- IPD
- POW1
- POWER-ONE INC
- P-ONE
- POWR
- POWER-1
- POWER-ONE (VA)
- POWR_ONE
- Power-One (Bel Power Solutions)
Especificaciones técnicas
Physical
Body MaterialCeramic
Case/PackageModule
MountThrough Hole
Number of Pins4
Number of Terminals4
Weight28 g
Technical
CompositionHybrid
Current - Output 12 A
Efficiency78 %
Frequency220 kHz
IsolationIsolated
Isolation Voltage700 Vrms
Max Input Voltage18 V
Max Operating Temperature90 °C
Max Output Current2 A
Max Output Power10 W
Max Output Voltage5.05 V
Max Power Dissipation10 W
Min Input Voltage9 V
Min Operating Temperature-40 °C
Min Output Voltage4.95 V
Nominal Input Voltage12 V
Nominal Output Voltage5 V
Number of Circuits1
Number of Outputs2
Output Current2 A
Output Power10 W
Output Voltage5 V
PackagingBulk
Power Rating10 W
Temperature GradeIndustrial
Voltage - Output 15 V
Dimensions
Depth25.91 mm
Height10.668 mm
Length51.308 mm
Width25.908 mm
Fichas técnicas y documentos
Descargar fichas técnicas y documentación del fabricante para Power-One DFC10E12S5.