onsemi MM74HC175MTC

Flip Flop D-Type Bus Interface Pos-Edge 1-Element 16-Pin TSSOP Rail

Tube e4 74HC NICKEL PALLADIUM GOLD flip flop 5mm 2V 26ns @ 6V 50pF 70MHz

2V~6V 70MHz 26ns@6V,50pF D-Type 4 1 8uA TSSOP-16 Flip Flops ROHS

D Flip-Flop, HC/UH Series, 1-Func, Positive Edge Triggered, 4-Bit, Complementary Output, CMOS, PDSO16

Quad D-Type Flip-Flop with Clear

IC FF D-TYPE SGL 4-BIT 16-TSSOP

IC D-TYPE POS TRG SNGL 16TSSOP

IC FF D-TYPE SNGL 4BIT 16TSSOP

The MM74HC175 high speed D-type flip-flop with complementary outputs utilizes advanced silicon-gate CMOS technology to achieve the high noise immunity and low power consumption of standard CMOS integrated circuits, along with the ability to drive 10 LS-TTL loads. Information at the D inputs of the MM74HC175 is transferred to the Q and Q# outputs on the positive going edge of the clock pulse. Both true and complement outputs from each flip flop are externally available. All four flip-flops are controlled by a common clock and a common CLEAR. Clearing is accomplished by a negative pulse at the CLEAR input. All four Q outputs are cleared to a logical "0" and all four Q# outputs to a logical "1." The 74HC logic family is functionally as well as pin-out compatible with the standard 74LS logic family. All inputs are protected from damage due to static discharge by internal diode clamps to VCC and ground.