onsemi FXL6408UMX

FXL6408 Series 1.65 to 4 V Open Drain 8-Bit I2C-Controlled GPIO Expander-UMLP-16

IC GPIO EXPANDER I2C 8B 16-UMLP / I/O Expander 8 I²C 400 kHz 16-UMLP (1.8x2.6)

I/O Port Expanders; FXL6408UMX; ON SEMICONDUCTOR; 16; 8; 400 kHz; I2C

Fully Configurable 8-Bit I2C-Controlled GPIO Expander

FXL6408 Tape & Reel (TR) ACTIVE (Last Updated: 5days ago) Active io expander 1.8V 2.6mm 400kHz 300muA

LOGIC IC - 16LD,UMLP,QUAD,ULTRATHIN MLP, 1.8 X 2.6MM BODY

UQFN-16(1.8x2.6) I/O Expanders ROHS

Config. 8-Bit I2C GPIO Expander UMLP16

Parallel I/O Port, 8 I/O, CMOS, QCC16

The FXL6408 is an 8-bit I2C-controlled GPIO expander. When configured in Input Mode, the FXL6408 monitors the input ports for data transitions and signals the baseband by asserting the /INT pin. The input default values can be programmed independently, allowing customized input detection. All inputs can be configured with pull-up or pull-down resistors to pre-bias the inputs in open-drain or non-driven applications. When configured in Output Mode, the GPIO pins are capable of delivering 6 mA output drive according to the I2C register set. The FXL6408 is designed to allow voltage translation from levels as low as 1.65 V and up to 4.0 V. The FXL6408 features an active LOW RESET input as well as Power-On Reset (POR) circuit and I2C software reset options.