onsemi FSQ510MX

700V Integrated Power Switch with Valley Switching control for 6Watt offline flyback converters

SMPS Power Switch(QRC), 0.5A, 700V, 7DIP/7LSOP/8DIP (Green)

700V 94.3kHz~132kHz 6.7V~20V MLSOP-7-2.54mm AC-DC Controllers & Regulators ROHS

Switching Controller, Current-mode, 0.36A, 100kHz Switching Freq-Max, PDSO7

IC OFFLINE SW PWM 7MLSOP / AC to DC Pulse Width Modulation Controller

FAIRCHILD SEMICONDUCTOR FSQ510MXPower Load Switch for Valley Switching Converter, 1 Output, 20V, 0.32A, SOP-7

Power Switch 0.28A 7-Pin MLSOP T/R

TAPE REEL/Green Mode FPS for QR operation

IC OFFLINE SWITCH FLYBACK 7LSOP

SWITCH, PWM, FET, 9W, 0.32A, 7SOP; Input Voltage:20V; Current Limit:320mA; On State Resistance:28ohm; Distribution Switch Case Style:SOP; No. of Pins:7; Thermal Protection:Yes; Power Dissipation Pd:1.38W; No. of Outputs:1; Operating Temperature Range:-40°C to +130°C; MSL:MSL 1 - Unlimited; Internal Switch:Yes

A Valley Switching Converter (VSC) generally shows lower EMI and higher power conversion efficiency than a conventional hard-switched converter with a fixed switching frequency. The FSQ510 (H or M) is an integrated valley switching pulse width modulation (VS-PWM) controller and SenseFET specifically designed for offline switch-mode power supplies (SMPS) for valley switching with minimal external components. The VS-PWM controller includes an integrated oscillator, under-voltage lockout (UVLO), leading-edge blanking (LEB), optimized gate driver, internal soft-start, temperature-compensated precise current sources for loop compensation, and self-protection circuitry. Compared with discrete MOSFET and PWM controller solutions, the FSQ510 (H or M) can reduce total cost, component count, size and weight; while simultaneously increasing efficiency, productivity, and system reliability. This device provides a platform for cost-effective designs of a valley switching flyback converters.