Honeywell SCX05DN

Pressure Sensor 5.8 Volt to 6.2 Volt 0Psi to 5Psi Differential/Gage 6-Pin

DIFFERENTIAL PRESSURE SENSOR FOR PNEUMATIC FLUID 5PSI MAX PRESSURE 20 V DC

Piezoresistive Sensor, Differential, 0Psi Min, 5Psi Max, Rectangular, Through Hole Mount

PRESSURE SENSOR, 0-5PSID; External Depth:26.2mm; External Length / Height:25.4mm; Fixing Centres:21.6mm; Hysteresis:1%; Lead Spacing:2.54mm; Linearity:1%; Ouput Impedance:4kohm; Pressure Range, Operating:0 to 5psid; Pressure, Max:20psi; Series:SCX; Temp, Op. Max:85°C; Temp, Op. Min:-40°C; Voltage, Reference:12V; Voltage, Supply Max:30V; Width, External:27.9mm

Pressure Sensor; Sensor Output:Voltage;; Pressure Sensor; Sensor Output:Voltage; External Depth:26.2mm; Voltage Rating:20V; Port Style:Straight; Pressure Measurement Type:Differential; Connection Size:0.08"; No. of Ports:1; Operating Pressure Max:5psi

The SCX series sensors provide a very cost-effective solution for pressure applications that require operation over wide temperature range. These internally calibrated and temperature compensated sensors were specifically designed to provide an accurate an

SCX Series, Differential, Gage; 0 psi to 5 psi Operating Pressure, Temperature Compensated, Straight Port The SCX series sensors provide a very cost-effective solution for pressure applications that require operation over wide temperature range. These internally calibrated and temperature compensated sensors were specifically designed to provide an accurate and stable output over a 0 °C to 70 °C [32 °F to 158 °F] temperature range. This series is intended for use with non-corrosive, non-ionic working fluids such as air, dry gases and the Like. Devices are available to measure absolute, differential and gage pressures from 1 psi (SCX01) up to 150 psi (SCX150). The Absolute (A in model number) devices have an internal vacuum reference and an output voltage proportional to absolute pressure. The Differential (D in model number) devices allow application of pressure to either side of the pressure-sensing diaphragm and can be used for gage or differential measurements. The SCX series devices feature an integrated circuit (IC) sensor element and laser trimmed thick film ceramic housed in a compact solvent resistant case. This package provides excellent corrosion resistance and provides isolation to external packaging stresses. The package has convenient mounting holes and pressure ports for ease of use with standard plastic tubing for pressure connection. If the application requires extended temperature range operation, beyond 0 °C to 70 °C [32 °F to 158 °F], two pins which provide an output voltage proportional to temperature are available for use with external circuitry. The 100 µS response time makes this series an excellent choice for computer peripherals and pneumatic control applications. The output of the bridge is ratio metric to the supply voltage. Operation from any dc supply voltage up to 20 Vdc is acceptable.