Honeywell MA3055

SENSOR, SEALED FRONT END HIGH TEMPERATURE, 11 IN. LEADS, 28 AWG, 20 TO 45 COIL R

Sensors, Magnetic Position Sensors, Speed and Direction - Variable Reluctance Speed Sensors

Sealed Front End VRS Sensor Automotive 2-Pin

Transportation & Industrial Speed Sensor

Vrs Speed Sensor |Honeywell MA3055

SENSOR VRS SINE WAVE WIRE LEADS

Speed Sensors VRS 1/4X.7 450F BTTP 28GA LDS

High Temperature VRS sensors are designed for use in applications where the sensor is exposed to temperatures up to 260 ºC [450 ºF]. Sealed Front-End versions are available for applications where the sensor is exposed to fluids, lubricants or adverse environmental conditions. Passive VRS (Variable Reluctance Speed) Magnetic Speed sensors are simple, rugged devices that do not require an external voltage source for operation. A permanent magnet in the sensor establishes a fixed magnetic field. The approach and passing of a ferrous metal target near the sensor’s pole piece (sensing area) changes the flux of the magnetic field, dynamically changing its strength. This change in magnetic field strength induces a current into a coil winding which is attached to the output terminals. The output signal of a VRS sensor is an ac voltage that varies in amplitude and wave frequency as the speed of the monitored device changes, and is usually expressed in peak to peak voltage (Vp-p). One complete waveform (cycle) occurs as each target passes the sensor’s pole piece. If a standard gear were used as a target, this output signal would resemble a sine wave if viewed on an oscilloscope. Honeywell also offers VRS sensors for general purpose, high output, power output, high resolution and hazardous location applications, as well as low-cost molded OEM versions.