Eaton DRQ127-6R8-R

WireWound SMD Inductor w/ Ferrite Core,6.8 uH +/-20%WireWound 13.3A Idc

General Purpose Inductor, 6.8uH, 20%, 4 Element, Ferrite-Core, SMD, 4949

Inductor Power Shielded Drum Core 7.387uH/29.55uH 20% 100KHz Ferrite 7.34A/3.67A 0.0116Ohm/0.0465Ohm DCR T/R

Inductor, Coupled, 6.8 uH, 11.6 Milliohm, 7.34 A, 12.5mm x 12.5mm x 8mm

INDUCT ARRAY 2 COIL 7.387UH SMD / Shielded 2 Coil Inductor Array 29.55 µH Inductance - Connected in Series 7.387 µH Inductance - Connected in Parallel 11.6mOhm DC Resistance (DCR) - Parallel 7.34 A Nonstandard

POWER INDUCTOR, 6.8UH, 7.34A, 20%, FULL REEL; Product Range: DRQ Series; Inductance, Parallel: 7.387µH; RMS Current, Parallel: 7.34A; Saturation Current, Parallel: 13.3A; Coupled Inductor Case: 12.5mm x 12.5mm x 8mm; Core Material: Ferrite

* 125oC maximum total temperature operation* Dual winding inductors that can be used as either a single inductor, or in coupled inductor/transformerapplications (1:1 turns ratio) * Four sizes of shielded drum core inductors* Windings can be connected in series or parallel, offering a broad range of inductance and current ratings* Peak current ratings from 0.13 Amps to 56 Amps * RMS current ratings from 0.128 Amps to 17.9 Amps* Inductance ratings from 0.33uH to 4.02mH * Surface Mount* 200 VAC Isolation between windings * Ferrite core material Applications * As a transformer: SEPIC, flyback* As an inductor: Buck, boost, coupled inductor * DC/DC converters* VRM inductor for CPU and DDR power supplies * Input and output filter chokes Environmental Data * Storage temperature: -40oC to +125oC* Operating temperature: -40oC to +125oC (Range is application specific).* Solder re flow temperature: 260oC max. for 10 seconds max.