Analog Devices ADL5317ACPZ-WP

SP Amp LOG Amp Single 6V/80V 16-Pin LFCSP EP Tray

IC BIAS CTRLR/CURR MON 16LFCSP

The ADL5317 is a high-voltage, wide dynamic range biasing and current monitoring device optimized for use with avalanche photodiodes. With the provision of a stable high-voltage supply up to 80 V, the bias voltage at the VAPD pin can be varied from 6 V to 75 V using the 3 V compatible VSET pin. The current sourced from the VAPD pin, over a range of 5 nA to 5 mA, is accurately mirrored with an attenuation of 5 and sourced from the IPDM monitor output. In a typical application, the monitor output drives a current-input logarithmic amplifier to produce an output representing the optical power incident upon the photodiode. The photodiode anode may be connected to a high-speed transimpedance amplifier for the extraction of the data stream. A signal applied at the VSET pin of 0.2 V to 2.5 V with respect to COMM is amplified by a fixed gain of 30 to produce the 6 V to 75 V bias at pin VAPD. The accuracy of the ADL5317's bias control interface allows for straightforward calibration to maintain constant avalanche multiplication factor of the photodiode over temperature. The current monitor output, IPDM, maintains its high linearity versus photodiode current over the full range of APD bias voltage. The current ratio of 5:1 remains constant as VSET and VPHV are varied. The ADL5317 is built for exceptional performance and low noise design for all APD modules and systems in next generation optical networks.