Analog Devices AD5622ACPZ-2-RL7

DAC 1-CH Resistor-String 12-bit 6-Pin LFCSP EP T/R

Surface Mount DUAL Supply ROHS3Compliant Digital to Analog Converter -40C~125C 3mm 6LSB 1.7Msps

Digital to Analog Converters - DAC SGL 2.7-5.5V 12Bit I2C

2.7-5.5V 10-BIT NANODAC WITH I2C

The AD5602/AD5612/AD5622, members of the nanoDAC® family, are single 8-/10-/12-bit buffered voltage-out DACs that operates from a single 2.7 V to 5.5 V supply, consuming <100 µA at 5 V. The AD5602/AD5612/AD5622 comes in a tiny LFCSP and SC70 packages. Each DAC contains an on-chip precision output amplifier allows rail-to-rail output swing to be achieved. The AD5602/AD5612/AD5622 utilizes a 2-wire I2C-compatible serial interface that operates in standard (100 KHz), fast (400 KHz) and high speed (3.4 MHz) modes. The references for AD5602/AD5612/AD5622 are derived from the power supply inputs and to give the widest dynamic output range. Each part incorporates a power-on reset circuit that ensures the DAC output powers up to 0 V and remains there until a valid write takes place to the device. The part contains a power-down feature that reduces the current consumption of the device to <150 nA at 3 V and provides software selectable output loads while in power-down mode. The devices are put into power-down mode over the serial interface. The low power consumption of the AD5602/AD5612/AD5622 in normal operation makes them ideally suited to portable battery operated equipment. The power consumption is 0.4 mW at 5 V. Product Highlights Available in 6-lead LFCSP and SC70 packages. Max 100µA power consumption, single-supply operation. This part operates from a single 2.7 V to 5.5 V supply and typically consumes 0.2 mW at 3 V and 0.4 mW at 5 V, making it ideal for battery-powered applications. The on-chip output buffer amplifier allows the output of the DAC to swing rail-to-rail with a typical slew rate of 0.5 V/µs. Reference derived from the power supply. Standard, fast and high speed mode I2C interface. Designed for very low power consumption. Power-down capability. When powered down, the DAC typically consumes <150 nA at 3 V. Power-on-reset and brown out detection. Applications Process control Data acquisition systems Portable battery-powered instruments Digital gain and offset adjustment Programmable voltage and current sources Programmable attenuators