Texas Instruments UC2834N

Tube BIPOLAR Obsolete R-PDIP-T16 linear regulator controller 5.5mA -40C~85C 19.305mm 15V

Controllers - Low Dropout (LDO) High Efficiency Linear Regulator

High Efficiency Linear egulator 16-PDIP -40 to 85

LDO Cntrlr REG 1.5V 16-Pin PDIP Tube

Linear Regulators; Output Current Max:350mA; Supply Voltage Max:40V; Package/Case:16-DIP; No. of Pins:16; Operating Temperature Range:-40°C to +85°C; IC Generic Number:; Leaded Process Compatible:Yes; Operating Temp. Max:85°C ;RoHS Compliant: Yes

Linear Regulators; Output Current Max:35; Primary Input Voltage:15V; No. of Outputs:1; No. of Pins:16; Output Current:350mA; Voltage Regulator Case Style:DIP; Operating Temperature Range:-40°C to +85°C; SVHC:No SVHC (19-Dec-2011); Accuracy %:2%; Base Number:2834; IC Generic Number:2834; Input Voltage Max:35V; Operating Temperature Max:85°C; Operating Temperature Min:-40°C; Output Current Max:350mA; Output Voltage:1.515V; Output Voltage Max:1.5V; Package / Case:PDIP; Supply Voltage Max:35V; Supply Voltage Min:5V; Termination Type:Through Hole; Voltage Regulator Type:LDO Controller

The UC1834 family of integrated circuits is optimized for the design of low input-output differential linear regulators. A high gain amplifier and 200mA sink or source drive outputs facilitate high output current designs which use an external pass device. With both positive and negative precision references, either polarity of regulator can be implemented. A current sense am-plifier with a low, adjustable, threshold can be used to sense and limit currents in either the positive or negative supply lines. In addition, this series of parts has a fault monitoring circuit which senses both under and over-voltage fault conditions. After a user defined delay for transient rejection, this circuitry provides a fault alert output for either fault condition. In the over-voltage case, a 100mA crowbar output is activated. An over-voltage latch will maintain the crowbar output and can be used to shutdown the driver outputs. System control to the device can be ac com-modated at a single input which will act as both a supply reset and remote shutdown terminal. These die are protected against excessive power dissi-pation by an internal thermal shutdown function.