Tektronix MDO3014

OSCILLOSCOPE, 100 MHZ, 4 ANALOG CH., 1 RF CH., 10M RECORD LENGTH, MDO3000 SERIES

MDO3014 Mixed Domain Oscilloscope, 4/16 Channel, 100MHz, 2.5 GS/s, 10 Mpts, MDO3000 Series

Mixed Domain Oscilloscope; (4) 100MHz analog channels, 10M record length, 100MHz spectrum analyzer, 3-year warranty, Certificate of Traceable Calibration Standard

OSCILLOSCOPE, 4CH, 100MHZ, 2.5GSPS; Product Range: MDO3000 Series; Scope Channels: 4 Channel; Bandwidth: 100MHz; Sampling Rate: 2.5GSPS; Display Memory Depth: 10 Mpts; Calculated Rise Time: 4ns; Scope Display Type: WVGA LCD Col

Oscilloscope, 4-Channel, 100Mhz, 2.5Gs/S; Rango De Producto:Serie Mdo3000; Canales Del Osciloscopio:4 Analógicos; Ancho De Banda:100Mhz; Frecuencia De Muestreo:2.5Gsps; Profundidad De Memoria:10 Mpts; Tiempo De Subida Calculado:4Ns |Tektronix MDO3014

Type of Oscilloscope = MSO / MDO / Bandwidth MHz = 100 / Analogue Channels = 4 / Digital Channels (MSO) = 16 / Rise Time ns = 4 / Vertical Sensitivity / Div Min. mV/div = 1 / Vertical Sensitivity / Div Max. V/div = 10 / Vertical Resolution Bit = 8 / Input Impedance MOhm = 1 / Sampling Rate GS/s = 2.5 / Trigger = SPI (Optional) / Trigger = RS-232 / 422 / 485 / UART (Optional) / Trigger = CAN (Optional) / Trigger = LIN (Optional) / Trigger = FlexRay (Optional) / Trigger = MIL-STD-1553 (Optional) / Trigger = I²S / LJ / RJ / TDM (Optional) / Trigger = Parallel / Trigger = Edge / Trigger = Sequence (B Trigger) / Trigger = Pulse Width / Trigger = Time Out / Trigger = Runt / Trigger = Logic / Trigger = Setup & Hold / Trigger = Rise / Fall Time / Trigger = Video / Trigger = Extended Video (Optional) / Trigger = I²C (Optional) / Interface Type = USB / Interface Type = GPIB / Interface Type = Ethernet / Interface Type = Video Out Port / Display Type = LCD-TFT / Power Supply = 100 ... 240 VAC, 120 W / Safety Category = CAT II 300 V / Time Basis Max. s/div = 1000 / Time Basis Min. ns/div = 1 / Warranty = 3 Years