onsemi MM74HCT164N

Serial In Parallel Out, HCT Series, 8-Bit, Right Direction, True Output, CMOS, PDIP14

Shift Register Single 8-Bit Serial to Parallel 14-Pin PDIP Rail

74HCT164 RoHS Compliant Tube 74HCT shift register 30ns 1.62g 4.5V~5.5V -40C~85C

74HCT CMOS, 74HCT164, DIP14, 5.5V; Logic IC Function:8bit Serial-In/Parallel-Out Shift Register; Logic IC Family:HCT; Logic IC Base Number:74164; Frequency:55MHz; Power, Ptot:600mW; Max Input Current:1µA; Voltage, Supply Min:4.5V; Voltage, Supply Max:5.5V; Case Style:DIP; Operating Temperature Range:-40°C to +85°C; Base Number:74; IC Generic Number:74HCT164; Logic Function Number:164; No. of Inputs:2; No. of Pins:14; Supply Voltage:5.5V; Temp, Op. Max:85°C; Temp, Op. Min:-40°C; Termination Type:Through Hole

The MM74HCT164 utilizes advanced silicon-gate CMOS technology. It has the high noise immunity and low consumption of standard CMOS integrated circuits. It also offers speeds comparable to low power Schottky devices. This 8-bit shift register has gated serial inputs and CLEAR. Each register bit is a D-type master/slave flip-flop. Inputs A & B permit complete control over the incoming data. A LOW at either or both inputs inhibits entry of new data and resets the first flip-flop to the low level at the next clock pulse. A high level on one input enables the other input which will then determine the state of the first flip-flop. Data at the serial inputs may be changed while the clock is HIGH or LOW, but only information meeting the setup and hold time requirements will be entered. Data is serially shifted in and out of the 8-bit register during the positive going transition of the clock pulse. Clear is independent of the clock and accomplished by a low level at the CLEAR input. The 74HCT logic family is functionally as well as pin-out compatible with the standard 74LS logic family. All inputs are protected from damage due to static discharge by internal diode clamps to VCC and ground. MM74HCT devices are intended to interface between TTL and NMOS components and standard CMOS devices. These parts are also plug-in replacements for LS-TTL devices and can be used to reduce power consumption in existing designs.