onsemi FAN4146ESX

Power Management ICs (PMICs); FAN4146ESX; ON SEMICONDUCTOR; 6; Surface Mount; SOT-23-6

FAN4146 Series 16 V 400 µA Surface Mount Ground Fault Interrupter - SSOT-6

INPUT FAULT PROTECTION CONTROLLER, Adjustable, 1 Channel, PDSO6

Ground Fault Interrupter Controller 6-Pin SuperSOT T/R

Controller -1.5V to 16V Tape and Reel 6-Pin SuperSOT

IC GROUND FAULT INTERRUPTER 12.7V TSOT-23

400¦ÌA 2.5V 1.5V 10V 16V SSOT-6 , 2.9mm*1.6mm*1mm

FAN4146 Tape & Reel (TR) Surface Mount Ground Fault Protection pmic power management device 3mm 2.5V -25C~80C 500muA

GFI - 6LD, SUPERSOT, JEDEC MO-193, 1.6MM WIDE

POWER SUPPLY SUPPORT CIRCUIT, AD

GROUND FAULT INTERRUPTER, 12.7V, TSOT-23; IC Function: Ground Fault Circuit Interrupter (GFCI); Supply Voltage Min: -; Supply Voltage Max: 12.7V; IC Package Type: TSOT-23; No. of Pins: 6P; Available until stocks are exhausted

The FAN4146 is a low-power controller for AC outlet Appliance Leakage Circuit Interrupters (ALCI) and two-wire Residual Current Devices (RCD). The FAN4146 detects hazardous grounding conditions and open circuits the line before a harmful shock occurs. Internally, the FAN4146 contains a diode rectifier, precision bandgap 12V shunt regulator, precision low VOS offset-sense amplifier, time delay noise filter, window-detection comparators, and a SCR driver. With the addition of a minimum number of external components, the FAN4146 detects and protects against a hot-wire-to-ground fault. The minimum number of components and the small SuperSOT™ package allow for a small-form-factor, low-cost application solution. The FAN4146 circuitry has a built-in rectifier and shunt regulator that operates with a low quiescent current. This allows for a high-value, low-wattage-series supply resistor. The internal temperature compensated shunt regulator, sense amplifier, and bias circuitry provide for precision ground-fault detection. The low VOS offset-sense amplifier allows direct coupling of the sense coil to the amplifier’s feedback signal. This eliminates the large 50/60Hz AC-coupling capacitor. The internal delay filter rejects high-frequency noise spikes common with inductive loads. This decreases false nuisance tripping. The internal SCR driver is temperature compensated and designed to satisfy the current requirements for a wide selection of external SCRs. The minimum number of external components and the 6-pin SuperSOT™ package enable for a low-cost, compact design and layout. The FAN4146ESX is an enhanced temperature range device.