Parts Categories Blog Tools
Sign in

Texas Instruments - SN754410NE

Technical Specifications

Number of Circuits:

4

Number of Pins:

16

Supply Voltage (DC):

36.0 V (max)

Case / Package:

DIP-16

Lead-Free Status:

Lead Free

Mounting Type:

Through Hole

Packaging:

Tube

RoHS:

Compliant

  Supplier Part Number Purchase In Stock 1: 10: 25: 100: 250: 500: 1000:
1

Newark*

08F8145

0 $1.86 $1.86 $1.65 $1.24 $1.16 $1.12 $1.08
2

Farnell*

1470411

0              
3

Arrow*

SN754410NE

yes              
4

Jameco

1054684

0 $1.55 $1.35 $1.35 $1.09 $1.09 $1.09 $1.09
5

Sierra IC

SN754410NE

Send RFQ   973 $1.74 $1.74 $1.74 $1.74 $1.74 $1.74 $1.74
6

Pololu

24

158 $2.95 $2.48 $2.48 $2.48 $2.48 $2.48 $2.48
7

Summit Electronics

SN754410NE

Send RFQ   496              
8

SMT Corp

SN754410NE

Send RFQ   136              
9

Solid Components

SN754410NE

61              

Texas Instruments

the sn754410 is a quadruple high-current half-h driver designed to provide bidirectional drive currents up to 1 a at voltages from 4.5 v to 36 v. the device is designed to drive inductive loads such as relays, solenoids, dc and bipolar stepping motors, as well as other high-current/high-voltage loads in positive-supply applications. all inputs are compatible with ttl-and low-level cmos logic. each output (y) is a complete totem-pole driver with a darlington transistor sink and a pseudo-darlington source. drivers are enabled in pairs with drivers 1 and 2 enabled by 1,2en and drivers 3 and 4 enabled by 3,4en. when an enable input is high, the associated drivers are enabled and their outputs become active and in phase with their inputs. when the enable input is low, those drivers are disabled and their outputs are off and in a high-impedance state. with the proper data inputs, each pair of drivers form a full-h (or bridge) reversible drive suitable for solenoid or motor applications. a separate supply voltage (vcc1) is provided for the logic input circuits to minimize device power dissipation. supply voltage vcc2 is used for the output circuits. the sn754410 is designed for operation from -40c to 85c.

Premier Farnell

driver, quad, half h, smd; driver ic type:line; no. of outputs:4; voltage, output:39v; output current:2a; voltage, supply min:4.5v; case style:pdip; no. of pins:16; operating temperature range:-40°c to +85°c; temp, op. max:85°c; temp, op. min:-40°c; termination type:through hole; voltage, supply max:36v

http://grh.premierfarnell.com/grh.aspx?mid=1001023&sku=SN754...

Newark

driver ic; supply voltage min:4.5v; supply voltage max:36v; termination type:through hole; package/case:pdip; no. of pins:16; operating temperature range:-40°c to +85°c; peak reflow compatible (260 c):no ;rohs compliant: yes

http://www.newark.com/jsp/search/productdetail.jsp?SKU=08F81...

Jameco Electronics

quad half-h driver/linear, interface<az

http://www.Jameco.com/webapp/wcs/stores/servlet/ProductDispl...

Pololu Robotics and Electronics

sn754410 motor driver ic

http://www.pololu.com/catalog/product/24...

SMT Corporation

quad half-h driver

http://www.smtcorp.com...

Have you used Texas Instruments SN754410NE?

There are no comments yet. Tell us what you think of Texas Instruments SN754410NE!